ESP Enterview 3VC Instructions d'exploitation télécharger pdf (Page 9)

ADDITIONAL INFORMATION

OPERATIONS

How to use buttons & adjustment on the unit

Communicating Function

Turn power switch ON. Use the slide switch for volume and brightness controls.

1. Visitor presses the “Call” button on the outside camera unit.

The monitor’s speaker will sound a “chime” tone to announce that a visitor is at

the door.

2. Upon viewing the monitor’s CRT screen and the visitor’s image, you have two choice ;

A. You can choose to “not respond” (by not lifting the handset) The visitor’s

image will disappear from the monitor’s CRT screen within 30 seconds

B. You can choose to “respond” by lifting the handset and talking to the visitor as if

using a telephone. The visitor’s image will remain on the CRT screen for 180

seconds, or until the handset is replaced back into the cradle.

3. After speaking with the visitor, and if you have installed an electronic door locking

system, you can push the “Open” button( ) to electronically unlock the door.

4. Press the call button( ) to call the additional monitor as an intercom.

BUTTON DESCRIPTION

Monitor ON/OFF of screen, talk through door camera

Intercom Activate an talk with the intercom

Door Door release

ADJUSTMENT DESCRIPTION

Brightness adjustment. (In off hook) After pick up the handset,

user can adjust the brightness of screen (Mode: Normal/ Brighter)

Volume adjustment. (In on hook) After placing the handset, user

can adjust the volume of sound (Mode: Normal/ Louder)

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

ESP Enterview 3VC Instructions d'exploitation Page 9