ESP CanCam Manuel d'instructions télécharger pdf (Page 4)

Quick Start Guide

This guide is designed to get the camera up and running in a matter of moments.

To get the most out of the CanCam and obtain a full understanding of its wide

range of options, please read the manual thoroughly before operating.

Quick Start-up:

Pull battery tab to activate batteries / Install 4 “C” cell batteries in correct•

polarity (+/-) as indicated in the battery compartment.

Insert SD card into the camera.•

Turn switch to CAM to adjust the Time and Date.•

The internal LCD screen displays T blinking.•

Press the [OK] button to start the Time settings.•

Press the [UP] or [DN] button to adjust the Minute setting and press [OK] to•

confirm and move to the Hour setting.

Repeat to set the Hour and then press [OK] to confirm and move to Date.•

Adjust the Month, Day, and Year by using [UP] or [DN] button. Each time you•

finish an adjustment you MUST press the [OK] button to confirm and move to

the next field for adjustment.

Once done, the word - dEL - will be blinking, this stands for Delete menu and•

will allow you to format your SD Card. (This will delete ALL images). Press the

[M] button to exit.

Select PSET (or CAM to input customised settings, see advanced programming)•

PSET This bypasses all user defined settings and uses the following

settings:

(PIR mode / Resolution: 3MP / Burst: 3P / Time out: 30 seconds)

P-SET Factory Default Settings:

Time Out: 30 Sec

Burst Mode: 3 Still Image

Resolution: 3M

Operation Mode: PIR

Video Mode: 10 Seconds (VGA Resolution)

Time lapse setting: 19:00-07:00 (Next day)

CanCam Manual_Layout 5 05/09/2013 12:21 Page 4

1 2 3 4 5 6 7 8 9 ... 19 20

Pas de commentaire

ESP CanCam Manuel d'instructions Page 4