ESP DIGI-VIEW 4 System Manuel d'utilisateur télécharger pdf (Page 15)

6.8. Connect to the target’s web server

A web server is included and started by default. The web server serves a default web page that resides in

the target filesystem. To access the web server:

1. Open a web browser.

2. In the Address input box, enter the IP address of the target. This page is displayed:

6.9. Create a Target Remote Configuration

For Digi ESP to communicate with the target a new remote configuration –a set of configuration options for

a specific target– is needed.

To create a new remote configuration, select menu Device Options > Device Manager.

In the Remote Configurations tree, select DigiEL and click New. In the Name edit box, enter the name of

the remote configuration, for example, myTarget.

Remote configuration settings are organized on three tabs:

On the General tab, in the IP Address field, enter the IP address of the target; for example,

192.168.42.30.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 29 30

Pas de commentaire

ESP DIGI-VIEW 4 System Manuel d'utilisateur Page 15