ESP DIGI-VIEW 4 System Manuel d'utilisateur télécharger pdf (Page 17)

If Digi ESP can reach the target's IP address, this message is displayed:

If it is not displayed, verify that the network settings of the host and the target are in the same subnet and

that they are physically connected to the same network.

Click on the File Transfer tab to configure the file transfer mechanism between Digi ESP and the

embedded system. Select Use FTP as default file transfer mechanism. In the Authentication group,

select (enable) the Requires login/password checkbox. Enter user login information: for Login enter

root

, for Password enter root.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 29 30

Pas de commentaire

ESP DIGI-VIEW 4 System Manuel d'utilisateur Page 17